Updating the Sensor
You can update the firmware of the sensor to the latest available version. Update to V2 or V3 when you upgrade from an M2 to an M3 system.
Downloading the Firmware
About this task
Note: Marport offices only. Only Marport offices can download new versions of
firmware. Dealerships need to ask their local Marport office to get the firmware.
Procedure
- From a web browser, go to Marport Authorized Service Provider (MASP) website: https://asp.marport.fr/.
- Go to Sensors, then type the sensor product serial number in the search box.
-
Open the sensor page, then click the board number in the tree view on
the left.Note: The product serial number is written on the end cap of the bottle or, for some sensors, on a plate on the housing. The board ID is written on Mosa2.
-
From the features section:
- In Application select Narrow Band Trawl Explorer 400Hz V2 or V3.
- In Version, select the latest firmware version.
-
Click Download MOSA App.. An *.a1f file is
saved in the Downloads folder.
Updating the Sensor
Before you begin
- You have the firmware file (*.a1f).
- You have Marport Basic Sensor Charger or Marport Medusa II Multi-charger.
Procedure
- Connect the sensor to Mosa2.
- From Mosa2, click and enter the password copernic.
- Click the tab Firmware.
-
Click Browse to import your
file.
Note: On tablet computers, Browse only search for *.a1f files in the Downloads folder.Information on the sensor firmware is displayed.
- Click Apply.
-
Wait for the updating to be complete.
- Connect and disconnect the sensor to a charger to restart the sensor and validate the update.