Operational Mode Indicator

A LED on the sensor's transducer indicates the operational mode of the sensor.

State Situation LED
Starting
  • Sensor has been switched on in water or with water switch.
  • Startup sequence: LED blinks green/off/red/off/green/red.
  • Then, fixed green for 1 sec.
Running
  • Sensor is in water.
  • Water switch is on.
  • For 1 min.: LED blinks red at the beginning of each uplink communication cycle.
  • Or, LED blinks green / red if the product configuration is not valid.
Configuring
  • Sensor is out of water.
  • User is testing and configuring using a Configuration Cable.
  • Sensor turns off after 10 min. without test or configuration operation.

LED blinks green.

Charging
  • Charger plug is connected.
  • User is configuring at the same time via the Dock.

LED blinks red.

On deck
  • Sensor has been hauled on deck.
  • The virtual water switch is on.
  • The sensor is locked in a low power state to not switch into running mode.

LED blinks green every 4 sec.