Back to support page

Home
System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.

System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
- Adding the Sensor to the Receiver
  You need to add the sensors to the receiver in order to display their data on Scala2.
- Configuring the System with the Positioning Option
  If the sensors have the positioning option, you need to configure the system in order to receive the trawl position and display it in Scala2.
- Configuring Data Display on Scala2
- Changing the Number of Trawls
  You need to remove specific clumps when reducing the number of trawls in water.
- Replaying Data Recorded on a SD Card
  You can replay in Scala2 data that have been recorded in high definition on the SD card .

System Configuration and Display

Learn how to configure the receiver and display the sensor data in Scala2 application.