Firmware and Features
This section describes the firmware and features that must be configured on MASP to set up the sensor.
To be operational, the sensor needs to be configured with two files:
- a firmware file (*.A2F): it is the firmware of the sensor,
- an application file (*.A2A): it defines the sensor features and options.
These files are generated via MASP.
Firmware
The latest version of the firmware is available for download on MASP.
Compatibility: F450-02.02.02 and after
Features and Options
The features and options are configurable according to the type of hardware and customer's choices.
Features |
|
Sounding Options |
|
Misc. options |
|
Measures |
|