Back to support page

Home
System Configuration and Display
Learn how to configure the receiver to be able to receive and display Trawl Explorer sensor data.
Adding the Sensor to the Receiver
You need to add the Trawl Explorer to the receiver in order to display sensor data on Scala2.

System Configuration and Display
Learn how to configure the receiver to be able to receive and display Trawl Explorer sensor data.
- Adding the Sensor to the Receiver
  You need to add the Trawl Explorer to the receiver in order to display sensor data on Scala2.
  - Adding the Sensor with a Configuration File
    You can add the sensor to the receiver with a configuration file that contains the sensor settings you configured on Mosa2.
  - Adding the Sensor Manually
    You can add the sensor to the receiver from Scala2, by entering the same settings as the ones in Mosa2.
- Configuring the Sensor Display on Scala2
  You can display Trawl Explorer measurements (e.g. echogram, depth, temperature,...) on pages in Scala2. For V3 version of the sensor, you can also display target strength data, that help you identify fish.

Adding the Sensor to the Receiver

You need to add the Trawl Explorer to the receiver in order to display sensor data on Scala2.

About this task

The Trawl Explorer is compatible with the following M3/M4/M5/M6 receiver and Scala versions:


	Mx version	Scala version
NBTE V1 (FIRM121)	all	all
NBTE V2 (FIRM126)	03.01.23 or later	all
NBTE V3 (FIRM128)	04.02.28 or later	01.02.05 or later