Operational Mode Indicator

A LED on the sensor's transducer indicates the operational mode of the sensor.


State	Situation	LED
Starting	Sensor has been switched on in water or with water switch.	Startup sequence: LED blinks green/off/red/off/green/red. Then, fixed green for 1 sec.
Running	Sensor is in water. Water switch is on.	For 1 min.: LED blinks red at the beginning of each uplink communication cycle. Or, LED blinks green / red if the product configuration is not valid.
Configuring	Sensor is out of water. User is testing and configuring using a Configuration Cable. Sensor turns off after 10 min. without test or configuration operation.	LED blinks green.
Charging	Charger plug is connected. User is configuring at the same time via the Dock.	LED blinks red. If connected to an incompatible charger and not charging, the LED stops blinking after approx. 10 sec.
On deck	Sensor has been hauled on deck. The virtual water switch is on. The sensor is locked in a low power state to not switch into running mode.	LED blinks green every 4 sec.