Back to support page
Applications
Here are examples of data received by the Trawl Navigator in Scala2.
The image below shows the display of data received from a Trawl Navigator installed on the headline. Pollocks can be
identified close to the bottom.
In this second example, the sensor automatic range mode is activated. The range of the
sounding is automatically reduced when the sensor gets closer to the bottom, in order to
have better quality images.
 |
| 1. Initial range (80 meters) / 2. Switch to a 20-meter range / 3. Switch to a 10-meter range / 4. Target detection: pollocks |