Back to support page

Home
System Configuration and Display
Learn how to configure the receiver to be able to receive and display HDTE sensor data.
Adding the Sensor to the Receiver
In order to display HDTE sensor data, you need to add it to the receiver.

System Configuration and Display
Learn how to configure the receiver to be able to receive and display HDTE sensor data.
- Adding the Sensor to the Receiver
  In order to display HDTE sensor data, you need to add it to the receiver.
  - Adding the Sensor with a Configuration File
    You can add the sensor to the receiver with a configuration file that contains the sensor settings you configured on Mosa2.
  - Adding the Sensor Manually
    You can add the sensor to the receiver from Scala2, by entering the same settings as the ones in Mosa2.
- Configuring Sensor Data Display on Scala2
  You can display HDTE incoming data (e.g. echogram, depth, temperature,...) on pages in Scala2. You can also display target strength data, that help you differentiate sizes and species of fish.

Adding the Sensor to the Receiver

In order to display HDTE sensor data, you need to add it to the receiver.

Note: System requirements:

M3/M4/M5/M6 receiver version 04.02.23 or later
Scala2 version 01.02.05 or later