Back to support page

Home
System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.

System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
- Adding the Sensor to the Receiver
  You need to add the sensors to the receiver in order to display their data on Scala2.
- Configuring Data Display in Scala2
  You can display the sensor's measurements and echograms on Scala2 pages.
- Outputting Scala2 Symmetry Data to Scantrol
  You can output across speed data from Scala2 to Scantrol iSYM application.
- Replaying Data Recorded on a Memory Card
  you can replay data that have been recorded in high definition on the sensor memory card card .

System Configuration and Display

Learn how to configure the receiver and display the sensor data in Scala2 application.