Back to support page

Home
Maintenance and Troubleshooting
Read this section for troubleshooting and maintenance information.
Troubleshooting
Learn how to solve common problems.
Catch status remains full or empty

Maintenance and Troubleshooting
Read this section for troubleshooting and maintenance information.
- Checking Noise Interference
  Use the spectrum analyzer to check the noise level of the hydrophones and check for interference.
- Charging the Sensor
  Charge the sensor at any battery level with either Marport Dock charger, Basic Sensor Charger or Medusa II Multi-charger.
- Cleaning the Sensor
  You need to regularly clean the sensor for proper performance.
- Maintenance Checklist
  We recommend you to follow this maintenance schedule for better performance and to avoid any trouble with the equipment.
- Replacing the Pull Cords
  You can replace the catch pull cords when they are worn out or damaged.
- Replacing the Catch Magnet
  You can replace the magnet that is part of the pull cord assembly when the magnet is broken.
- Troubleshooting
  Learn how to solve common problems.
- Support Contact
  You can contact your local dealer if you need maintenance on your Marport products. You can also ask us at the following contact details:

Catch status remains full or empty

Catch status displayed on Scala2 remains blocked on full or empty status.

The catch magnet may be broken.

From Mosa2, test the catch sensor (see Testing the Catch Sensor on Mosa2).
If the status remains full or empty, the catch magnet placed at the basis of the pull-cords may be broken. See Replacing the Catch Magnet to check and replace it.