Back to support page

Home
System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
Configuring Data Display on Scala2
Using the MultiDepth View on Scala2
You can display a 3D view showing the trawl gear and the echogram images received from the Door Explorer sensors.

System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
- Adding the Sensor to the Receiver
  You need to add the sensors to the receiver in order to display their data on Scala2.
- Configuring the System with the Positioning Option
  If the sensors have the positioning option, you need to configure the system in order to receive the trawl position and display it in Scala2.
- Configuring Data Display on Scala2
  - Displaying Echograms
  - Using the MultiDepth View on Scala2
    You can display a 3D view showing the trawl gear and the echogram images received from the Door Explorer sensors.
    - Displaying the MultiDepth View
    - Display Options
      You can change the display of the MultiDepth view using a setting panel. Click the arrow on the right side of the view to show the display options.
  - Using the MultiTrawl View on Scala2
    You can display a global 3D view of the trawl gear.
  - Displaying Door Positioning Data
    If the door sensors have the positioning option, you can display views showing the trawl position.
- Changing the Number of Trawls
  You need to remove specific clumps when reducing the number of trawls in water.
- Replaying Data Recorded on a SD Card
  You can replay in Scala2 data that have been recorded in high definition on the SD card .

Using the MultiDepth View on Scala2

You can display a 3D view showing the trawl gear and the echogram images received from the Door Explorer sensors.