Sensor has difficulty connecting to Mosa2
Mosa2 is very slow or unable to detect the sensor.
The wireless connection does not work correctly.
- Connect and disconnect the sensor to a charger to make the sensor reboot.
The sensor is out of the range of the wireless signal.
- Bring the sensor closer to the computer.
Mosa2 may have trouble detecting the sensor if you
try reconnecting to it to check that the changes have been successfully saved. If this is the
case, you need to remove the sensor from the Bluetooth preferences:
- Go to .
- Select the sensor from the list, then click Remove device.
- Repeat the procedure to add again the sensor as a peripheral device.
- Open Mosa2 and connect to the sensor.