Back to support page

Home
Display Configuration
Read this section to know how data are displayed on Scala and how to change their display.
Receiver Data

Display Configuration
Read this section to know how data are displayed on Scala and how to change their display.
- Control Panels
- Sensor Data
- Ownship & Trawl Data
- Data Estimation
- Receiver Data
- Creating Data Pages
- Managing Windows
- Customizing the Display of Data
- Setting an Alarm on Incoming Data
  You can be alerted by an alarm when data received have a given value.
- Changing the Default Units
  You can change the default units of data displayed in Scala.
- Recording and Replaying Data
  Data received by Scala can be replayed with Scala Replay application.

Receiver Data

Receiver activity and its IP address is displayed in the bottom right corner of the screen.

A dot next to the receiver name indicates its activity:

: the receiver is detected.
: the receiver is active.
: the receiver is in Spectrum mode.
: the receiver is in audio recording mode.
: the communication with the receiver has just been lost. There is a connection problem.
: the communication with the receiver has been lost for at least 20 seconds.

Note: Receiver IP address may change according to equipment.