The sensor is not running when testing out of water

You activated the sensor water switch outside water or in a low level of water (for example for testing purpose) but it does not switch to running mode and does not emit any data.

The virtual water switch option may be activated in Mosa2. When this option is activated, the sensor runs only at a depth more than 2 meters. For more details, read About the Virtual Water Switch Option.

  1. Connect the sensor to Mosa2 and check if there is an orange warning sign at the top of the window. If yes, it means the virtual water switch is on.

  2. Go to Communications page, then in Options, click .

  3. Deactivate the Virtual water switch option.