Back to support page

Home
Sensor Charging and Configuration
Learn how to use the Dock to charge and configure the sensors.
LED Strip Status Summary
A LED strip located above the charger connectors lights up according to the status of the sensor when the charger is connected.

Sensor Charging and Configuration
Learn how to use the Dock to charge and configure the sensors.
- Overview of the Dock Screen
  The Dock displays the following information when the latest generation of sensors are connected. If previous generation sensors are connected, the screen only displays the level of charge.
- Charger Plug Status Summary
- LED Strip Status Summary
  A LED strip located above the charger connectors lights up according to the status of the sensor when the charger is connected.
- Charging a Sensor
  Connect a sensor to one of the 4 charging connectors of the Dock to display its level of charge.
- Using the Virtual Charger Room
  You can configure the latest generation of sensors from Scala2 Virtual Charger Room when they are connected to the Dock.
- Interface with Mosa2

LED Strip Status Summary

A LED strip located above the charger connectors lights up according to the status of the sensor when the charger is connected.


LED ribbon color	Description
Slow green flashing	> 90 % charge status
Slow orange flashing	70 to 90 % charge status
Slow red flashing	< 70 % charge status
Slow yellow flashing	Updating
Fast red flashing	Critical issue, disconnect the charger plug from the Dock.