Home
Sensor Charging and Configuration
Learn how to use the Dock to charge and configure the sensors.

Sensor Charging and Configuration
Learn how to use the Dock to charge and configure the sensors.
- Overview of the Dock Screen
  The Dock displays the following information when the latest generation of sensors are connected. If previous generation sensors are connected, the screen only displays the level of charge.
- Charger Plug Status Summary
- LED Strip Status Summary
  A LED strip located above the charger connectors lights up according to the status of the sensor when the charger is connected.
- Charging a Sensor
  Connect a sensor to one of the 4 charging connectors of the Dock to display its level of charge.
- Using the Virtual Charger Room
  You can configure the latest generation of sensors from Scala2 Virtual Charger Room when they are connected to the Dock.
- Interface with Mosa2

Sensor Charging and Configuration

Learn how to use the Dock to charge and configure the sensors.

Important: You must configure the trawl node of the sensor to be able to see information about it on the Dock screen and Virtual Charger Room. To configure the trawl node, connect the sensor to the Dock or computer and open Mosa2 on the computer.