Learn how to use the Dock to charge and configure the sensors.
The Dock displays the following information when the latest generation of sensors are connected. If previous generation sensors are connected, the screen only displays the level of charge.
A LED strip located above the charger connectors lights up according to the status of the sensor when the charger is connected.
Connect a sensor to one of the 4 charging connectors of the Dock to display its level of charge.
You can configure the latest generation of sensors from Scala2 Virtual Charger Room when they are connected to the Dock.
Connect the sensor to Mosa2 when it is charging or by connecting a Configuration Cable to the Dock.
Back to support page