Back to support page

Home
System Configuration and Display
Learn how to configure the receiver to be able to receive and display Seine sensor data.
Adding the Sensor to the Receiver
You need to add Seine sensors to the receiver in order to display sensor data on Scala2.
Adding the Sensor Manually
You can add the sensor to the receiver from Scala2, by entering the same settings as the ones in Mosa2.

System Configuration and Display
Learn how to configure the receiver to be able to receive and display Seine sensor data.
- Adding the Sensor to the Receiver
  You need to add Seine sensors to the receiver in order to display sensor data on Scala2.
  - Defining the Trawl Gear Type
    You need to choose a purse seine as trawl gear to be able to add seine sensors.
  - Adding the Sensor with a Configuration File
    You can add the sensor to the receiver with a configuration file that contains the sensor settings you configured on Mosa2.
  - Adding the Sensor Manually
    You can add the sensor to the receiver from Scala2, by entering the same settings as the ones in Mosa2.
    - Adding the Sensor to the Receiver
      You can add the sensor to the receiver from Scala2, by entering the same settings as the ones in Mosa2.
    - Configuring the Sensor Settings
- Configuring Data Display on Scala2
  You can display measurements of Seine sensors (e.g. depth, height, echogram...) on pages in Scala2.

Adding the Sensor Manually

You can add the sensor to the receiver from Scala2, by entering the same settings as the ones in Mosa2.