Back to support page

Home
System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
Adding the Sensor to the Receiver
You need to add the sensors to the receiver in order to display their data on Scala2.

System Configuration and Display
Learn how to configure the receiver and display the sensor data in Scala2 application.
- Adding the Sensor to the Receiver
  You need to add the sensors to the receiver in order to display their data on Scala2.
  - Adding the Sensor to the Receiver
    You need to add the sensors to the receiver using the system web page.
  - Configuring Sensor Settings
    You need to complete communication settings when you add the sensor to the receiver.
- Configuring Data Display on Scala2
  You can display the sensor's measurements and echograms on Scala2 pages.
- Displaying the Trident View
  Trident sensors have a dedicated 3D view, showing the echogram beams, the sounding range, the depth and roll values of the sensor.
- Replaying Data Recorded on a Memory Card
  you can replay data that have been recorded in high definition on the sensor memory card card .

Adding the Sensor to the Receiver

You need to add the sensors to the receiver in order to display their data on Scala2.

For compatibility details, see System Compatibility.