Back to support page

Home
Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
Changing the Default Units
You can change the default units of data displayed in Scala2.

Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
- Control Panels
- Customization Panels
  The customization panels contain customization options for the data.
- Receiver Data
- Using the Virtual Charger Room
  You can display the fleet of sensors in Scala2 Virtual Charger Room, when sensors are connected to the Dock or trawling.
- Creating Data Pages
- Managing Windows
- Customizing the Display of Data
- Setting an Alarm on Incoming Data
  You can be alerted by an alarm when data received have a given value.
- Changing the Default Units
  You can change the default units of data displayed in Scala2.
- Recording and Replaying Data
  Data received by Scala2 can be replayed with ScalaReplay2 application.

Changing the Default Units

You can change the default units of data displayed in Scala2.

Procedure

From the top left corner, click Menu > Settings.
In Units, select the units to use in Scala2 among the following units:
- For distance data: meter, foot, yard, fathom, cable length (only for lengths)
- For speed data: kilometer/hour, knot, meter/second, mile/hour
- For temperature data: Celsius or Fahrenheit
Tip: Hover over the units in the menu to see for which data they are used.