Home
Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
Customizing the Display of Data

Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
- Control Panels
- Customization Panels
  The customization panels contain customization options for the data.
- Receiver Data
- Using the Virtual Charger Room
  You can display the fleet of sensors in Scala2 Virtual Charger Room, when sensors are connected to the Dock or trawling.
- Creating Data Pages
- Managing Windows
- Customizing the Display of Data
  - Echograms
    Echograms are a representation of what is detected by the sensors with the acoustic signals.
  - Zooming on Timestamp and Distance Scale
    In echograms and history plots, you can zoom in and out on the distance scale and timestamp and move them along.
  - Sensor Numerical Data
    Data such pitch and roll, temperature, depth can be displayed in dials, gauges, history plots or text format.
  - 3D Views
    You can display 3D views of different elements from the system, for example the trawl doors or trawl speed sensors.
  - Displaying the Chart View
    You can display the location and trajectory of the trawl behind the vessel if you receive GPS data and have door positioning sensors.
  - Displaying a Position Marker
    You can place a marker on plots and echograms to display the GPS position at a given time on the timestamp.
- Setting an Alarm on Incoming Data
  You can be alerted by an alarm when data received have a given value.
- Changing the Default Units
  You can change the default units of data displayed in Scala2.
- Recording and Replaying Data
  Data received by Scala2 can be replayed with ScalaReplay2 application.

Customizing the Display of Data

Note: Customization options are all in the panel on the left side of the screen, available in Customize mode.

Note: The display of some data have changed with Scala2:

Bearing angles (systems with trawl positioning option): relative (R) bearing angles are now relative to the stern, unlike the first versions of Scala where angles were relative to the heading of the vessel. Angles toward port side are negative and angles toward starboard side are positive. True (T) bearing angles are not displayed anymore.
Twin Trawl Spread Plot: right-click the plot to switch to a Single Trawl Spread Plot.