Back to support page

Home
Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
Creating Data Pages
Exporting a Page
You can export pages you created, for example if you want to reuse them for other configurations.

Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
- Control Panels
- Customization Panels
  The customization panels contain customization options for the data.
- Receiver Data
- Using the Virtual Charger Room
  You can display the fleet of sensors in Scala2 Virtual Charger Room, when sensors are connected to the Dock or trawling.
- Creating Data Pages
  - Creating a New Page
    You can create a new page from scratch or from a template.
  - Adding Data to a Page
    You can choose data that will appear on the screen.
  - Removing Data from a Page
    You can remove data such as a dial, an echogram, a plot, that is displayed on a page.
  - Hiding a Page
    You can hide a page if you do not need to keep it in the tabs on the top bar.
  - Exporting a Page
    You can export pages you created, for example if you want to reuse them for other configurations.
  - Deleting a Page
    You can delete pages.
- Managing Windows
- Customizing the Display of Data
- Setting an Alarm on Incoming Data
  You can be alerted by an alarm when data received have a given value.
- Changing the Default Units
  You can change the default units of data displayed in Scala2.
- Recording and Replaying Data
  Data received by Scala2 can be replayed with ScalaReplay2 application.

Exporting a Page

You can export pages you created, for example if you want to reuse them for other configurations.

Before you begin

You must be in Customize mode to do this task.

Procedure

Right-click the page tab and select Export File.
Choose where you want to save the page.

What to do next

Deactivate the Customize mode when you have finished customizing pages: click Menu > Customize again.
To reuse this page in other configurations: see Adding Data to a Page.