Back to support page

Home
Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
Creating Data Pages
Removing Data from a Page
You can remove data such as a dial, an echogram, a plot, that is displayed on a page.

Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
- Control Panels
- Customization Panels
  The customization panels contain customization options for the data.
- Receiver Data
- Using the Virtual Charger Room
  You can display the fleet of sensors in Scala2 Virtual Charger Room, when sensors are connected to the Dock or trawling.
- Creating Data Pages
  - Creating a New Page
    You can create a new page from scratch or from a template.
  - Adding Data to a Page
    You can choose data that will appear on the screen.
  - Removing Data from a Page
    You can remove data such as a dial, an echogram, a plot, that is displayed on a page.
  - Hiding a Page
    You can hide a page if you do not need to keep it in the tabs on the top bar.
  - Exporting a Page
    You can export pages you created, for example if you want to reuse them for other configurations.
  - Deleting a Page
    You can delete pages.
- Managing Windows
- Customizing the Display of Data
- Setting an Alarm on Incoming Data
  You can be alerted by an alarm when data received have a given value.
- Changing the Default Units
  You can change the default units of data displayed in Scala2.
- Recording and Replaying Data
  Data received by Scala2 can be replayed with ScalaReplay2 application.

Removing Data from a Page

You can remove data such as a dial, an echogram, a plot, that is displayed on a page.

Before you begin

You must be in Customize mode to do this task.

Procedure

Right-click data and select Remove Dial (or other data type).

What to do next

Deactivate the Customize mode when you have finished customizing pages: click Menu

> Customize again.