Back to support page

Home
Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
Recording and Replaying Data
Data received by Scala2 can be replayed with ScalaReplay2 application.
Replaying Data Recorded on a SD Card
You can replay data that have been recorded in high definition on the SD card .

Display Configuration
Read this section to know how data are displayed on Scala2 and how to change their display.
- Control Panels
- Customization Panels
  The customization panels contain customization options for the data.
- Receiver Data
- Using the Virtual Charger Room
  You can display the fleet of sensors in Scala2 Virtual Charger Room, when sensors are connected to the Dock or trawling.
- Creating Data Pages
- Managing Windows
- Customizing the Display of Data
- Setting an Alarm on Incoming Data
  You can be alerted by an alarm when data received have a given value.
- Changing the Default Units
  You can change the default units of data displayed in Scala2.
- Recording and Replaying Data
  Data received by Scala2 can be replayed with ScalaReplay2 application.
  - Recording of Incoming Data
    Data received by Scala2 can be recorded on your computer.
  - Replaying Data on ScalaReplay2
    You can replay on ScalaReplay2 data you have recorded.
  - Adding Events
    You can mark a specific moment when receiving live data to find it back when replaying data with ScalaReplay2.
  - Extracting Data from SDS Files
  - Replaying Data Recorded on a SD Card
    You can replay data that have been recorded in high definition on the SD card .

Replaying Data Recorded on a SD Card

You can replay data that have been recorded in high definition on the SD card .

About this task

Note: Data in high definition is available only when downloading them from the sensor memory. Data received in Scala2 will have a lower definition.

Procedure

Download from Mosa2 the files recorded on the sensor memory. (refer to the user guides of the sensors for instructions).
Right-click the timeline and click Change Directory to choose the source directory where the files are stored.
In the replay bar, the recording period of the files in high definition is displayed in green.

In the control panels, data that were received in live are displayed in the Mx panel and data recorded on the SD card are displayed in the A2S Data panel.
Go to the control panels, then click and drag data from the A2S Data panel to a page.